Updated Nov 19, 2026· 17 min read

Key takeaways

  • Compare five dummy batteries for streaming cameras by battery family and power source, from SmallRig and ZGCINE D-Tap couplers to a budget F1TP kit.

Quick answer: A dummy battery is bought by battery family first and power source second, so start with the family your camera already uses. For the Sony NP-FZ100 bodies that anchor most streaming desks, the HY1C NP-FZ100 AC kit is the straightforward wall-power pick. Canon streamers on LP-E6 family bodies should start with the Kimaru ACK-E6 kit, unless the body is a newest-generation LP-E6P model such as the EOS R5 Mark II, which the Kimaru kit excludes and the SmallRig LP-E6P D-Tap coupler covers. Streamers still running the original Sony ZV-E10 or an A6000 series body need the older NP-FW50 family, served here by the budget F1TP AC-PW20 kit, and rig builders who already own V-mount batteries can skip wall adapters entirely with the two D-Tap couplers in this guide.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

Why Streaming Cameras Run Out of Battery

A mirrorless camera makes an excellent streaming camera right up to the moment its battery gives out. The batteries these bodies carry were sized for stills shooting and short clips, and a multi-hour stream at a desk drains them on a schedule that has nothing to do with the stream’s schedule. Swapping a battery mid-session means touching the camera, breaking the framing and, on many bodies, restarting the HDMI feed. A dummy battery, also called a DC coupler, removes the time limit: it is a battery-shaped plug that sits in the camera’s battery compartment and carries power in by cable from an external source, so the camera runs for as long as the source does.

The five kits here split along two lines. The first is battery family, which is not a preference but a physical fit: two couplers serve Sony’s NP-FZ100 family, one serves Sony’s older NP-FW50 family, and two serve Canon’s LP-E6 family in its standard and newest LP-E6P forms. The second line is the power source at the other end of the cable. Three kits end in an AC wall adapter for a fixed desk; two end in a D-Tap plug and draw from a V-mount battery the streamer already owns for lights or a rig.

How to Choose

The battery family decides fit before anything else does. A coupler is machined to one battery’s shape and contact layout, and families with similar names are not interchangeable. Sony’s current NP-FZ100 and older NP-FW50 look alike in a listing title and fit entirely different compartments: the original ZV-E10 takes NP-FW50, while the ZV-E10 II takes NP-FZ100. Canon’s LP-E6 family has the same trap in the other direction, because the newest bodies moved to the LP-E6P variant and some older coupler kits exclude them by name. The reliable check is the battery model printed on the battery you already own, matched against the kit’s published compatibility list.

Choose the power source for the desk you actually have. An AC adapter kit is the complete purchase: coupler, adapter and cord, plugged into the wall, done. It suits a fixed streaming desk and needs nothing else on the shelf. A D-Tap coupler is only the camera half of the system; it assumes a V-mount battery with a D-Tap port, which is why the two D-Tap picks here list no adapter in the box. For a streamer who already powers lights from V-mount bricks, that is one battery system running the whole rig. For anyone else, it is a second purchase hiding inside the first.

Regulation is the specification that protects the camera. A camera expects a narrow voltage window, and the coupler’s job is to hold the external source inside it. The ZGCINE coupler publishes its regulation explicitly: it takes a 12 to 17 V input range from a V-mount battery and regulates it down to a consistent 8 V output. The AC kits convert wall power in their adapter bricks, and the F1TP kit publishes its output as DC 7.6 V at 2 A. Where a listing publishes no output figure at all, that silence is itself a fact to weigh; two kits here are marked that way rather than filled in from sibling products.

The cable has to leave the camera somehow. A coupler’s cable exits through the battery compartment, and bodies handle that differently: many streaming cameras have a small cable port or rubber flap in the battery door, while others need the door held ajar or replaced with a slotted third-party door. Cable length matters at the same time. The F1TP kit’s maker publishes a 12 ft cord, the ZGCINE’s cable is a short 60 cm run meant for a battery mounted on the same rig, and a short cable on a desk camera simply moves the power source onto the tripod.

A dummy battery is not a battery. None of these couplers stores any charge; unplug the source and the camera stops. That is the correct trade for a desk, where the wall or a large V-mount brick outlasts any in-camera cell, but it means a coupler kit is not a field solution, and it also means the camera’s battery gauge may behave differently or show warnings with a third-party coupler, which is why the compatibility list, not the connector shape, is the document to trust.

Quick Comparison

Product Tier Battery family Power source Published output
SmallRig Dummy Battery for Canon LP-E6P Premium Canon LP-E6P V-mount battery, D-Tap Coupler only, no adapter
ZGCINE D-Tap to NP-FZ100 Dummy Battery Premium Sony NP-FZ100 V-mount battery, D-Tap Regulated 8 V from 12 to 17 V input
HY1C NP-FZ100 AC Power Adapter Kit Mid-range Sony NP-FZ100 AC wall adapter 3 A adapter rating per the listing data
Kimaru ACK-E6 LP-E6 Dummy Battery Kit Mid-range Canon LP-E6, LP-E6N, LP-E6NH AC wall adapter Not stated in the listing data reviewed
F1TP NP-FW50 AC-PW20 Kit Budget Sony NP-FW50 AC wall adapter DC 7.6 V at 2 A

Check price on Amazon

Check price on Amazon

Check price on Amazon

1. SmallRig Dummy Battery for Canon LP-E6P

Check price on Amazon

The SmallRig coupler is the premium Canon pick, and its defining published specification is the compatibility list: it is built for the LP-E6P battery and covers the newest Canon bodies, including the EOS R5 Mark II and R6 Mark III, alongside the R5, R5C, R6, R6 Mark II and R7 and the long run of LP-E6 DSLRs behind them. That list matters because it is exactly where the older LP-E6 kits stop: the Kimaru kit below excludes the R5 Mark II by name. A Canon streamer who bought a current body has, until recently, had the thinnest coupler selection of any family in this guide.

The coupler is a cable, not a kit. It ends in a D-Tap plug and draws from a V-mount or cinema battery, and the box contains the dummy battery and a user manual, nothing else. The listing’s product information gives an input voltage of 9.5 V, the figure a buyer matches against the D-Tap output of the battery they already own. For a streamer whose rig already runs lights and a monitor from V-mount power, this is the cleanest Canon route: one battery system, no wall adapter brick on the desk, and a coupler whose compatibility list is written for the bodies streamers are buying now.

Specs

  • Model: 5410, dummy battery for Canon LP-E6P
  • Type: DC coupler (dummy battery), coupler cable only
  • Battery family: Canon LP-E6P
  • Power source: V-mount or cinema battery with a D-Tap port, not included
  • Connector: D-Tap
  • Input voltage: 9.5 V per the listing’s product information
  • Compatible cameras: Canon EOS R5 Mark II, R6 Mark III, R6 Mark II, R5, R5C, R6, R7, 5D Mark II, 5D Mark III, 5D Mark IV, 6D, 6D Mark II, 7D, 7D Mark II, 60D, 60Da, 70D, 80D, 90D, XC10, XC15, 5DS, 5DS R
  • Included: Dummy battery, user manual
  • Warranty: Not stated in the listing data reviewed

2. ZGCINE D-Tap to NP-FZ100 Dummy Battery

The ZGCINE coupler is the Sony half of the D-Tap pair, built for the NP-FZ100 family that covers most current Sony streaming bodies: the A7 III and A7 IV, the A7S III, the FX3 and FX30 cinema bodies, the A6600 and A6700, the ZV-E1 and the ZV-E10 II. Its published regulation figure is the reason to pick it over an unbranded cable: the listing states that it regulates an input range of 12 to 17 V down to a consistent 8 V output, which is the specification that stands between a V-mount battery’s varying charge level and the camera’s voltage window.

The working details are rig details. The cable is 60 cm, long enough to reach a battery mounted on the same cage or tripod and short enough not to drape across a desk, and the D-Tap plug is rotated 180 degrees, a small orientation choice that decides whether the cable exits toward or away from the camera body on a crowded rig. Like the SmallRig, this is a coupler only: the box holds the DT-FZ100 cable, and the V-mount battery it drinks from is a separate part of the rig. The listing is sold through the EACHSHOT storefront with ZGCINE named as the manufacturer.

Specs

  • Model: DT-FZ100, D-Tap to NP-FZ100 dummy battery
  • Type: DC coupler (dummy battery) with regulated cable
  • Battery family: Sony NP-FZ100
  • Power source: V-mount battery with a D-Tap port, not included
  • Input: 12 to 17 V DC per the listing description
  • Output: Regulated 8 V per the listing description
  • Cable: 60 cm, rotated 180-degree D-Tap plug
  • Compatible cameras: Sony A7 III, A7 IV, A7S III, A7R III, A7R IV, A7R V, A7C, A7C II, A1, A9, A9 II, A6600, A6700, FX3, FX30, ZV-E1, ZV-E10 II
  • Included: DT-FZ100 coupler cable
  • Manufacturer: ZGCINE, sold through the EACHSHOT storefront
  • Warranty: Not stated in the listing data reviewed

3. HY1C NP-FZ100 AC Power Adapter Kit

The HY1C kit is the wall-power answer for the same Sony NP-FZ100 family, and it is the pick most Sony streamers should start with, because it is complete: the box holds the dummy battery, the AC adapter and a US-plug power cable, and nothing else needs to be on the shelf. Its compatibility list covers the streaming standbys, the A7 III and A7 IV, A7S III, the A7C line, the FX3 and FX30, the A6600 and A6700, the ZV-E1 and the ZV-E10 II, and it replaces the NP-FZ100 battery and its BC-QZ1 charger in the camera’s power path.

Two boundaries on that list deserve the emphasis the listing itself gives them. The kit is not for the older A7 II generation, and it is not for the original ZV-E10, which belongs to the NP-FW50 family and takes the F1TP kit below instead; the near-identical camera names make this the most likely ordering mistake in the whole guide. The listing data rates the adapter at 3 A on a 120 V AC input and gives the kit’s weight as 220 g. What the listing data does not publish is an output voltage figure or a warranty term, and both are marked as not stated here rather than borrowed from other NP-FZ100 kits, whose adapters are not interchangeable parts.

Specs

  • Model: NP-FZ100 Dummy Battery kit
  • Type: DC coupler (dummy battery) with AC power adapter
  • Battery family: Sony NP-FZ100, replaces the NP-FZ100 battery and BC-QZ1 charger
  • Power source: AC wall power, US plug
  • Input: 120 V AC per the listing data
  • Adapter rating: 3 A per the listing data
  • Output voltage: Not stated in the listing data reviewed
  • Compatible cameras: Sony A1, A9, A9 II, A7 III, A7 IV, A7R III, A7R IV, A7R V, A7S III, A7C, A7C II, A7CR, A6600, A6700, FX3, FX30, ZV-E1, ZV-E10 II
  • Not compatible: Sony A7 II generation bodies, original ZV-E10 (NP-FW50 family)
  • Weight: 220 g
  • Included: NP-FZ100 dummy battery, AC power adapter, AC power cable (US plug)
  • Warranty: Not stated in the listing data reviewed

4. Kimaru ACK-E6 LP-E6 Dummy Battery Kit

The Kimaru kit is the Canon LP-E6 family’s wall-power standard, an ACK-E6 pattern adapter and DR-E6 pattern coupler covering the LP-E6, LP-E6N and LP-E6NH batteries. Its published compatibility list is long because the family is old: the EOS R, R5, R6, R6 Mark II and R7 mirrorless bodies, the 90D, 80D, 70D and 60D, and the 5D Mark II through Mark IV, 6D, 6D Mark II, 7D, 7D Mark II, 5Ds and 5Ds R. For a streamer running an EOS R or an R6 as a desk camera, this is the complete, inexpensive route off battery power, with the adapter and coupler both in the box.

The kit’s limit is printed in its own listing and is the mirror image of the SmallRig’s strength: it is not compatible with the EOS R5 Mark II or the R6 Mark III, the bodies that moved to the LP-E6P battery. A buyer with a newest-generation Canon body should not assume the family name carries over; the SmallRig coupler above is the LP-E6P answer. The listing identifies the kit by its model number, TDX-080300, and lists the ACK-E6 power adapter and the LP-E6 dummy battery as the built-in contents. It publishes no output figure and no warranty term in the data reviewed, so both stand as not stated below.

Specs

  • Model: TDX-080300, ACK-E6 power adapter kit
  • Type: DC coupler (dummy battery) with AC power adapter
  • Battery family: Canon LP-E6, LP-E6N, LP-E6NH (DR-E6 coupler pattern)
  • Power source: AC wall power
  • Output: Not stated in the listing data reviewed
  • Compatible cameras: Canon EOS R, R5, R6, R6 Mark II, R7, 90D, 80D, 70D, 60D, 60Da, 5D Mark II, 5D Mark III, 5D Mark IV, 5Ds, 5Ds R, 6D, 6D Mark II, 7D, 7D Mark II
  • Not compatible: Canon EOS R5 Mark II, R6 Mark III (LP-E6P bodies)
  • Included: ACK-E6 power adapter, LP-E6 dummy battery / DC coupler
  • Warranty: Not stated in the listing data reviewed

5. F1TP NP-FW50 AC-PW20 Kit

The F1TP kit is the budget entry, and it serves the Sony family the newer kits leave behind: NP-FW50, the battery of the original ZV-E10, the A6000, A6100, A6300, A6400 and A6500, the A5000 and A5100, the first A7 generation and the RX10 II, III and IV. Those bodies remain common streaming cameras precisely because they were the affordable mirrorless generation, and their owners are the ones most likely to discover that a coupler is sold by family, not by brand: none of the NP-FZ100 kits above fits them.

Against the newer kits, the F1TP publishes the most complete power figures of the three AC kits here: an input of 100 to 240 V AC and an output of DC 7.6 V at 2 A, 15.2 W, per the maker’s listing copy, which also gives the cord at 12 ft, the longest reach in this guide and a genuine desk-planning advantage when the outlet is not beside the tripod. The box holds the AC-PW20 adapter, the NP-FW50 dummy battery and a US power cord. The compatibility boundary is the same one the HY1C states from the other side: this kit is not for the ZV-E10 II or the A7 III, which are NP-FZ100 bodies.

Specs

  • Model: AC-PW20 NP-FW50 power adapter kit
  • Type: DC coupler (dummy battery) with AC power adapter
  • Battery family: Sony NP-FW50
  • Power source: AC wall power, US plug
  • Input: 100 to 240 V AC
  • Output: DC 7.6 V at 2 A (15.2 W) per the maker’s listing copy
  • Cord length: 12 ft per the maker’s listing copy
  • Compatible cameras: Sony ZV-E10, A6000, A6100, A6300, A6400, A6500, A5000, A5100, A7, A7 II, A7R, A7R II, A7S, A7S II, RX10 II, RX10 III, RX10 IV, NEX series
  • Not compatible: Sony ZV-E10 II, A7 III (NP-FZ100 bodies)
  • Included: AC-PW20 power adapter, NP-FW50 dummy battery, US power cord
  • Warranty: Not stated in the listing data reviewed

Before You Buy: Family, Door and Voltage Checks

Match the battery model, not the camera name. The two expensive mistakes in this category are both name collisions: the ZV-E10 and ZV-E10 II take different families, and the EOS R5 and R5 Mark II take different generations of the LP-E6 family. Every kit here prints its exclusions in its own listing, and the Specs blocks above carry them. Read the model off the battery in your hand and buy against that, because a coupler that almost fits fits nothing.

Check how the cable leaves your camera before ordering. The coupler cable exits through the battery compartment. Many streaming bodies provide a small cable port in the battery door; others need the door unlatched or swapped for a slotted door, and some cameras will not power on at all unless the door’s closed switch is satisfied. This is a five-minute check in the camera’s manual that decides whether a kit works on arrival, and it is the most common reason couplers are returned as faulty when they are not.

Count what the D-Tap picks still need. The SmallRig and ZGCINE couplers are cables, and their published box contents end at the cable and a manual. Each assumes a V-mount battery with a D-Tap port, sized for the stream’s full length plus whatever else the same battery is powering. A streamer without V-mount power already in the rig should price the battery into the comparison, at which point the complete AC kits are usually the shorter path.

A coupler removes the battery limit, not the heat limit. Running from external power takes the discharging battery out of the camera, and it does nothing for the heat the sensor and processor make on their own. A body with a thermal ceiling will still reach it on a long, high-resolution stream. The coupler guarantees the camera will not die from an empty battery mid-session; it does not promise the session can run at every setting the body offers.

Safety record. None of the five products in this guide, and no dummy battery or DC coupler line from these makers, appears in CPSC recall notices in the records reviewed. The nearest camera-power recall on record is a different product class: Fujifilm’s 2018 recall of AC-5VF wall adapter plugs bundled with certain cameras, a shock hazard in the plug, not in a coupler. Because a coupler feeds power through the battery contacts, the sensible checks are to buy the kit whose compatibility list names your exact body, to inspect the cable and adapter for damage before a session, and to verify the exact model on saferproducts.gov.

FAQ

Will a dummy battery stop my camera overheating during a long stream?

No. A coupler removes the battery as a power limit and takes one heat source, a discharging battery, out of the body, but the sensor, processor and display keep making heat, and a camera with a thermal limit will still reach it. What the coupler changes is certainty about power: the stream ends when you end it, not when a battery does. If a body overheats, the fixes live in its recording settings and airflow, not in its power supply.

Can one dummy battery serve two different camera bodies?

Only when both bodies take the same battery family. A coupler is shaped for one family’s compartment and contacts, so an NP-FZ100 coupler serves any NP-FZ100 body, from an A7 III to an FX30, and fits nothing in the NP-FW50 family, not even another Sony. Cross-brand sharing does not exist in this category. Streamers running two bodies from different families need one coupler per family, which is why the family, not the camera brand, is the first line of every Specs block above.

Does my camera need a special battery door to use a coupler?

Many do not: a long list of streaming bodies build a small cable port or rubber flap into the battery door for exactly this accessory. Bodies without one need the door held open, removed, or replaced with a slotted third-party door, and a few bodies refuse to power on unless the door registers as closed. The check belongs before the purchase, in the camera manual’s section on AC adapter or DC coupler use, because it decides whether the kit is a five-minute install or a small project.

Is powering the camera over USB-C just as good as a dummy battery?

It depends on the body, and the difference is real. Some current bodies run fully from a USB Power Delivery source while streaming; others only charge the battery over USB, run with restrictions, or cannot sustain their highest recording modes on USB power alone. A dummy battery feeds the camera through the battery contacts at the voltage the body was built around, which is why couplers remain the standard answer for bodies whose USB power support is partial. Check the manual for both options before assuming the cable you already own settles it.

Conclusion

Buy the family first and the power source second. Sony NP-FZ100 streamers at a fixed desk should take the HY1C kit for its complete box and long compatibility list; Sony streamers on a V-mount rig should take the ZGCINE coupler for its published regulation. Canon streamers split by generation: the Kimaru ACK-E6 kit covers the long LP-E6 line at a budget-friendly level, and the SmallRig coupler is the pick for the LP-E6P bodies it excludes. Owners of the original ZV-E10 and the A6000 generation are served by the F1TP kit, the only NP-FW50 entry here and the one with the most complete published power figures. Whichever family you hold, confirm the battery model and the battery door before ordering, and the mid-stream battery swap becomes a problem you used to have.

S
StreamingJet Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Dummy Batteries for Streaming Cameras: 5 PicksCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.