Updated Nov 19, 2026· 26 min read

Key takeaways

  • Compare the best phone mounts for streaming by clamp range, cold shoes, thread mounts and MagSafe fit, from a full cage to a pocket tripod pick.

Quick answer: Phone mounts are bought on grip type, clamp range and accessory mounts, in that order, because the mount’s job in a streaming setup is to hold the phone exactly where the camera framing needs it, for hours, while a microphone and a light compete for the same few inches of hardware. Streamers who already own a tripod or a light stand and need the phone on it should begin with the ULANZI ST-02S, the machined aluminum clamp that anchors this guide. Streamers building a phone-first rig with handles, a microphone and a light should look at the SmallRig Universal Phone Cage. Streamers who need the stand included and want legs that wrap, grip and level on uneven furniture should look at the JOBY GripTight GorillaPod PRO 2. Streamers on a MagSafe iPhone who want the mount to live on the phone itself should look at the Peak Design Mobile Tripod. Streamers on the smallest budget who need a microphone and a light carried on one small adapter should look at the ULANZI ST-06S.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

Why Phone Mounts Matter for Streaming

The phone has become a streaming camera through the side door. It starts as the chat monitor, becomes the second angle when the main camera is a camcorder locked to the desk, and on mobile and IRL setups it is the whole production: camera, encoder and uplink in one device. Every one of those jobs ends at the same physical problem. A phone is a smooth glass slab with no tripod socket, no cold shoe and no flat side that stays put, and a stream runs for hours, so the mount holding it is not an accessory to the camera — it is the part of the camera that decides where the lens points, whether the frame drifts when the desk is bumped, and whether the microphone and the fill light can ride along or have to find their own stands.

That is why the buying decision is mechanical before it is anything else. The first question is the grip: a screw clamp that closes on the phone’s edges, a cage that surrounds it and adds mounting points, or a magnetic plate that snaps to the back. The second is the range, because phones now span widths that overlap the limits of older clamps, and the measurement that matters is the phone in its case, not the phone in the launch announcement. The third is what else the mount carries. A streaming phone rarely works alone: a wireless microphone receiver or a small shotgun wants a cold shoe, a fill light wants another, and a power bank wants somewhere to live once the stream passes the phone’s battery. A mount with one cold shoe and a mount with two are different rigs wearing similar names.

One boundary defines this guide: every pick is a mount from an established camera-accessory maker, with a published model number, published clamp or fit range and published mounting points a buyer can check. The marketplace is full of unbranded clamp sticks sold under rotating names, advertised with width ranges their springs cannot hold and cold shoes that flex under a light; they hold a phone, after a fashion, and none of them publishes a model number that survives a season, a fit range measured the same way twice, or a warranty term, and none of them is here. A streamer whose phone work is a single vertical clip a week needs the pocket end of this guide; the moment the phone becomes a camera position in a multi-device stream — and on this site’s streaming guides, the phone angle is the one that makes a desk stream look produced — the mount becomes part of the rig.

How to Choose

Choose the grip from the job, not from the phone. The three grip families divide this guide, and they solve different problems. A clamp adapter — the two ULANZI picks here — is a jaw on a thread: it adds nothing but grip, weighs almost nothing, and assumes the stand, the tripod and the accessories already exist or have their own mounts. A cage — the SmallRig pick — is a frame: it grips the phone and then keeps going, adding threaded holes, cold shoes and handles until the phone is the center of a small rig rather than the end of a stand. A magnetic mount — the Peak Design pick — removes the jaw entirely and holds the phone by the magnets already in its back, trading mechanical grip for a mount that folds flat against the phone and travels with it. Buy the family that matches the stream: a fixed desk angle wants a clamp, a handled mobile rig wants a cage, and a phone that moves between desk, tripod and hand all day wants the magnet.

Measure the phone in its case, in inches, before anything else. Every clamp and cage in this guide publishes a width range, and every one of those ranges is a hard boundary: a phone a fraction wider than the range does not fit loosely, it does not fit. The trap is that the published phone width is the bare device, while the streamed phone wears a case, and a protective case adds width at exactly the edges the clamp grips. The ranges here cluster between about 2.2 and 3.7 in, which covers most current phones bare and most in slim cases, but a large phone in a thick protective case can pass the top of the narrower ranges. The discipline is the one this site applies to every sized accessory: measure the cased phone across its width, compare it to the middle of the mount’s range rather than its edge, and treat a mount whose range the phone only just enters as a mount that will fight the case’s buttons and rails.

Count the cold shoes the rig actually needs. A streaming phone’s accessory list is short and predictable: a microphone first, a fill light second, and after that a receiver, a monitor or a power bank depending on the setup. Each of those wants a mounting point, and the points come in two standards — the cold shoe, a slotted bracket that slides and locks, and the 1/4 in threaded hole, the same thread that joins cameras to tripods. The picks here span the whole ladder: the Peak Design carries no accessory mounts at all because it is a stand rather than a rig piece, the ST-02S carries one cold shoe, the ST-06S carries two, and the SmallRig cage carries several of both standards plus handles. Count the accessories before choosing, because the mount that runs out of shoes pushes the microphone onto its own stand, and a microphone on its own stand is a microphone that drifts out of position relative to the phone it serves.

Match the mount to the stand already on the desk. Almost every mount here meets the rest of the rig at the 1/4 in thread, the universal joint of camera hardware: tripod heads, light stands, boom arms, desk mounts and monopods all present that thread or its matching hole. The exceptions deserve their lines. The ST-06S also carries a camera hot shoe foot, so it can ride on top of a camera or a cage as a second-device mount — a phone above the main camera, reading chat over the lens. The JOBY pick includes its own legs, so it needs no stand at all and its mount unscrews for use on other hardware. The Peak Design is the true exception: it is a stand, not an adapter, and it does not attach the phone to a tripod — it replaces the tripod at tabletop height. A buyer with a stand already in place should read the magnetic pick as a second mount for travel and desk use, not as the mount that puts the phone on the stand.

Decide whether portrait is a mode or the main event. A growing share of streaming is vertical: the phone co-stream, the short-form clip recorded beside the main show, the mobile stream that is vertical from first frame to last. Mounts divide on how they handle the turn. The clamp picks here rotate the phone between landscape and portrait on the mount itself, the ST-06S adding a pitch adjustment that tilts the phone without a ball head, and the cage holds either orientation because its mounting points surround the phone. The magnetic pick folds into a kickstand that works in both orientations at desk height. The practical reading is that a streamer who switches orientation between sessions should buy the rotation built into the mount rather than plan to re-clamp the phone sideways in a landscape jaw, which is how phones end up gripped by their buttons at an angle the frame regrets.

Weigh the mount against the stream’s length, not its start. A mount is at its best in the first minute, when the clamp is freshly tightened and the legs freshly bent. A stream runs for hours, and the failure modes are slow ones: a spring clamp relaxing its grip on a warm phone, flexible legs settling a fraction under a top-heavy rig, a magnetic hold meeting a bumped desk. The builds here split by how they answer time. The ST-02S closes with a screw knob rather than a spring, so its grip is set by the streamer and does not relax. The cage removes the question by surrounding the phone. The JOBY’s legs are rated by the maker to a published capacity that covers a phone with room to spare, and its clamp locks rather than springs. The magnetic pick’s hold is the one to think about honestly: it is rated by its maker for the phone alone, and a streamer who hangs a microphone and a light off a magnetic mount is building a rig the magnet was not asked to carry — those accessories belong on the cage or the clamps.

Quick Comparison

Product Tier Grip type Fit Accessory mounts
ULANZI ST-02S Aluminum Phone Tripod Mount Mid-range Screw clamp Phones 2.6 to 3.7 in wide 1 cold shoe, 1/4 in threads
SmallRig Universal Phone Cage Premium Cage with handles Phones 2.4 to 3.4 in wide Multiple cold shoes and 1/4 in threads
JOBY GripTight GorillaPod PRO 2 Premium Locking clamp with flexible legs Phones 2.2 to 3.6 in wide 1/4 in thread, legs included
Peak Design Mobile Tripod Premium Magnetic (MagSafe) MagSafe phones and cases None; stand only
ULANZI ST-06S Phone Tripod Mount Budget Clamp on hot shoe foot Phones 2.4 to 3.5 in wide 2 cold shoes, 1/4 in thread

1. ULANZI ST-02S Aluminum Phone Tripod Mount

Check price on Amazon

The ULANZI ST-02S is the clamp pick, and its argument is material. Where the budget end of this category is molded plastic on a spring, the ST-02S is machined aluminum closed by a screw knob: the phone goes between padded jaws, the knob sets the grip, and the grip stays where it was set for the length of the stream. It presents the two connections a streaming phone needs — a cold shoe on top for the microphone or the fill light, and 1/4 in threaded holes that meet the tripod, the light stand or the desk mount already in the room — and it rotates between landscape and portrait on the mount, so the vertical co-stream and the horizontal second angle are the same hardware at two angles. At 2.9 oz it adds almost nothing to a stand’s load, which matters on the desk mounts and boom arms whose capacity is spent on the camera end of the rig.

Its cautions are about range and record rather than build. The range is the clamp’s published span of 2.6 to 3.7 in, generous for the category, but it is still a span: a phone in a thick protective case should be measured against it as the How to Choose section describes, and the very widest phones in the very thickest cases sit at its edge. The record is the thinner part. The listing evidence reviewed rests on a full crawl of the listing some months old rather than a current tracker history, and the checks section below describes the live-offer confirmation that deserves. Buy the ST-02S when a stand already exists in the setup, the phone works as a camera position on it, and the mount’s whole job is to grip hard, carry one accessory and disappear.

Specs

  • Model: ST-02S
  • Type: Aluminum phone tripod mount (clamp adapter)
  • Material: Aluminum alloy, per the maker’s published data
  • Clamp range: Phones 2.6 to 3.7 in wide, per published listing data
  • Clamp action: Screw-knob tensioner with padded jaws, per published listing data
  • Orientation: Vertical and horizontal shooting, per the listing title
  • Accessory mounts: 1 cold shoe mount, per the maker’s published data
  • Stand connection: 1/4 in threaded holes, per the maker’s published data
  • Dimensions: 1.26 x 1.73 x 4.21 in, per the listing’s product information
  • Weight: 2.9 oz, per the listing’s product information
  • UPC: Not stated in the listing data reviewed
  • Warranty: Not stated in the listing data reviewed

2. SmallRig Universal Phone Cage

Check price on Amazon

The SmallRig Universal Phone Cage is the rig pick, built for the streamer whose phone is not an accessory to the production but the production itself. The cage surrounds the phone in an aluminum frame fitted to phones 2.4 to 3.4 in wide, and the frame is the point: threaded holes and cold shoe mounts run around it, so the microphone, the fill light and the power bank holder all bolt to the same structure the phone sits in, and the two included side handles turn the assembly into a two-handed rig for the walking segments of a mobile stream. It is the only pick here that answers the accessory-count question by surplus — a streamer who has not yet bought the microphone or the light is buying mounting points ahead of the accessories, and the cage will still be the right frame when they arrive. On a tripod it mounts by the same 1/4 in threads, so the handled rig and the locked-off desk angle are one build at two moments of the show.

The honest limits are size and purpose. A cage is the largest object in this guide by a wide margin, and it earns its size only when the accessories and the handles are in use; a streamer who wants the phone on a desk stand and nothing else is carrying a frame around a clamp’s job, and the ST-02S above does that job smaller. The fit range is also the narrowest of the clamp-family picks at the top end, so the widest phones in cases should be measured with particular care against the published span. The listing evidence is the standard pattern for this maker — a full listing crawl some months old showing the cage sold by the maker and shipped from Amazon — and the checks section gives the family trap to avoid, because SmallRig sells this cage alone and bundled into kits with lights, microphones and tripods under separate listings. Buy the cage when the phone rig carries two or more accessories, the stream moves between tripod and hands, and the mount needs to be a frame rather than a jaw.

Specs

  • Model: 4121
  • Type: Universal phone video cage with dual side handles
  • Material: Aluminum alloy, per the maker’s published data
  • Phone fit: Phones 2.4 to 3.4 in wide, with case, per the maker’s published data
  • Accessory mounts: Multiple cold shoe mounts and 1/4 in threaded holes around the frame, per the maker’s published data
  • Handles: Two side handles included, per the listing title
  • Stand connection: 1/4 in threaded holes, per the maker’s published data
  • Dimensions: Not stated consistently in the listing data reviewed
  • Weight: Not stated in the listing data reviewed
  • UPC: Not stated in the listing data reviewed
  • Warranty: Not stated in the listing data reviewed

3. JOBY GripTight GorillaPod PRO 2

Check price on Amazon

The JOBY GripTight GorillaPod PRO 2 is the self-contained pick, the one that arrives with its own legs. The GripTight PRO 2 mount is a locking clamp fitted to phones 2.2 to 3.6 in wide, with a tilt for portrait and landscape work, and under it sits the maker’s flexible GorillaPod leg set: three jointed legs that stand on a desk, wrap around a rail, a shelf edge or a microphone stand, and level the phone on furniture that was never meant to hold a camera. For the streamer whose second angle lives wherever it can — the kitchen counter for the cooking stream, the workshop bench, the hotel desk on a travel day — the wrap-and-grip legs solve the placement problem that a threaded adapter assumes away. The mount also unscrews from the legs onto the standard 1/4 in thread, so the kit’s clamp can work on a full tripod when the flexible legs are not the answer, and the maker’s published capacity for the leg set covers a phone and its clamp with room to spare.

Its cautions are generational and documentary. Generational, because JOBY’s GripTight line is a family of near-identical names across a decade — the original GripTight mounts, the ONE line, the PRO line, the PRO 2, a PRO 3 and the TelePod variants — and the pinned product here is the PRO 2 kit, matched by the model number in the Specs rather than by the words GripTight, which appear on all of them. Documentary, because the listing evidence reviewed rests on regional listing data some months old, with the model carried in current roundup coverage; the checks section describes the confirmation to run. One design note belongs in the open: flexible legs settle. A wrapped leg under a phone holds its position well, but a streamer framing a locked-off shot for a long stream should re-check the frame after the first minutes, the same discipline the reference guides on this site apply to every friction-held mount. Buy the GripTight GorillaPod PRO 2 when the phone’s position changes from stream to stream, the surfaces are irregular, and the mount has to bring its own stand.

Specs

  • Model: JB01551
  • Type: Locking phone clamp mount with flexible GorillaPod tripod legs
  • Clamp range: Phones 2.2 to 3.6 in wide, per the maker’s published data
  • Capacity: Up to 2.2 lb, per the maker’s published data for the leg set
  • Orientation: Landscape and portrait via the mount’s tilt, per the maker’s published data
  • Stand connection: 1/4 in-20 thread; mount removable from the legs, per the maker’s published data
  • Dimensions: 2.38 x 7.25 x 7.25 in, per the listing’s product information
  • Weight: 7.4 oz, per the listing’s product information
  • UPC: Not stated in the listing data reviewed
  • Warranty: Not stated in the listing data reviewed

4. Peak Design Mobile Tripod

Check price on Amazon

The Peak Design Mobile Tripod is the magnetic pick, and its argument is that the best mount is the one already on the phone. It is a machined aluminum plate, about the footprint of a credit card and a fifth of an inch thick, that snaps to the back of a MagSafe iPhone — or to the maker’s own cases and adapter on other phones — through the maker’s SlimLink magnetic mount, and folds out into three things: a three-legged tabletop tripod, a kickstand, and a hand grip, with a micro ball head setting the angle in tripod mode. For the streamer whose phone work is the desk-angle second camera, the travel stream and the chat phone that has to stand by the keyboard at a readable tilt, it removes the clamp from the workflow entirely: the phone comes off the stand by a pull, goes back on by a snap, and the stand itself never leaves the phone, so it is present in the hotel room and the green room rather than in the gear bag that stayed home. At 2.7 oz it is the lightest complete stand in this guide.

Its limits are the magnet’s, and they are real. It holds the phone and only the phone: there are no cold shoes and no threaded accessory points, so the microphone and the light need their own mounts, and a rig that hangs accessories off the phone belongs on the cage or a clamp. It is also a tabletop stand with no height of its own, so the phone’s camera sits at desk level unless the desk provides the elevation — a stack of the stream’s own furniture design that the other picks solve with the stand they thread onto. And the fit boundary is magnetic rather than mechanical: a phone without MagSafe magnets needs the maker’s case or its Universal Adapter, which is a second purchase the clamp picks do not ask for. The stock evidence is the freshest pattern in this guide — current price-tracking coverage of the Amazon listing within recent weeks and a marketplace mirror showing the listing in stock and fulfilled by Amazon within days of this guide — and the checks section notes the one family trap, the maker’s full-size Travel Tripod, which is a different product under a similar name. Buy the Mobile Tripod when the phone is a MagSafe iPhone, the stream is at desk height, and the mount’s job is to be there every time rather than to carry anything.

Specs

  • Model: M-TR-AA-BK-1
  • Type: Magnetic pocket tripod and stand
  • Attachment: SlimLink magnetic mount, MagSafe compatible, per the maker’s published data
  • Compatibility: MagSafe iPhones, the maker’s cases, and other phones with the maker’s Universal Adapter, per the maker’s published data
  • Modes: Tripod, kickstand and hand grip, per the maker’s published data
  • Adjustment: Micro ball head, per the maker’s published data
  • Material: Machined anodized aluminum with anti-slip feet, per the maker’s published data
  • Accessory mounts: None; stand only
  • Dimensions: 3.8 x 2.2 in folded, about 0.2 in thick, per published data
  • Weight: 2.7 oz, per published data
  • UPC: 818373023225
  • Warranty: Maker’s lifetime guarantee, per the maker’s published data

5. ULANZI ST-06S Phone Tripod Mount

Check price on Amazon

The ULANZI ST-06S is the budget pick, and it earns the place by carrying more mounting points per ounce than anything else here. It is a small plastic clamp adapter, 1.8 oz, fitted to phones 2.4 to 3.5 in wide, and its back carries two cold shoes — the microphone and the fill light riding one adapter — above a base that works two ways: a 1/4 in thread for the tripod or stand, and a camera hot shoe foot, so the phone can also ride on top of the main camera or a cage as the chat screen or the second angle over the lens. It rotates a full circle between landscape and portrait and adds a pitch adjustment that tilts the phone without a ball head, a small mechanism that replaces a piece of hardware the budget rig has not bought. For the streamer assembling a phone position from parts — a stand already owned, a microphone and a light that both need shoes — it is the adapter that makes the parts into a rig.

The honest gaps are the ones its tier implies. The body is plastic where the ST-02S above is machined aluminum, and its clamp is the lighter mechanism: it holds a phone securely for a stream, but a streamer who repositions the phone constantly, or mounts it overhead where a slip costs the device, should buy the metal clamp’s screw-set grip instead. Its published fit range also tops out below its sibling’s, so the widest cased phones belong on the ST-02S. The listing evidence follows the maker’s usual pattern of regional listing data some months old, with the model carried as a current pick in roundup coverage updated within days of this guide, and the checks section separates it from its near-namesakes — the earlier ST-06 with one cold shoe, and the metal ST-27 and ST-02S above it in the same maker’s line. Buy the ST-06S when the budget decides, two accessories need carrying, and the phone’s position is a desk or a camera top rather than an overhead arm.

Specs

  • Model: ST-06S
  • Type: Phone tripod mount adapter with hot shoe foot
  • Material: Plastic, per the maker’s published data
  • Clamp range: Phones 2.4 to 3.5 in wide, per the maker’s published data
  • Accessory mounts: 2 cold shoe mounts, per the maker’s published data
  • Rotation: 360 degree rotation with pitch adjustment, per the maker’s published data
  • Stand connection: 1/4 in thread and camera hot shoe foot, per the maker’s published data
  • Dimensions: 4.13 x 1.26 in, per the maker’s published data
  • Weight: 1.8 oz, per the maker’s published data
  • UPC: 716053672247
  • Warranty: Not stated in the listing data reviewed

Before You Buy: Recall, Variant and Listing Checks

Recall record. No CPSC or FDA recall located in the records reviewed covers any of the five mounts above, or phone tripod mounts as a class, and a streamer repeating this check should search saferproducts.gov by maker and model, since mounts sit in a category the databases file under camera accessories. None of the five picks holds a battery, heats, or stores anything — the Peak Design pick’s hold is a passive magnet — so the category’s recall history runs through the powered accessories that ride on mounts rather than the mounts themselves, and the transferable discipline is the one this site applies to every friction and magnetic hold: a clamp whose jaws have cracked or a magnet plate whose legs have loosened should be retired before it is trusted over a hard floor, whatever its brand.

Variant, suffix and family traps. Every maker here sells one mount under several near-identical names, and the pinned products in the table are the named models, not the families. ULANZI’s trap is breadth inside one line: the ST-02S is the machined aluminum clamp, the ST-06S is the plastic two-shoe adapter, and the same catalogue holds the earlier ST-06 with a single cold shoe, the metal ST-27, and a row of flexible mini tripods with built-in holders, all under similar headlines — match the model code, not the words phone tripod mount. JOBY’s trap is generational: GripTight appears on the original mounts, the ONE line, the PRO line, this PRO 2 kit, a PRO 3 and the TelePod variants, plus tablet versions with their own listings, so the pinned kit is the one whose model number is JB01551. SmallRig’s trap runs in the other direction: the pinned product is the bare Universal Phone Cage, model 4121, while the same cage also circulates inside kit listings that bundle lights, microphones, tripods and handles under separate identifiers, so a buyer comparing the cage alone against a kit is comparing two different boxes. Peak Design’s trap is a shared surname: the Mobile Tripod in this guide is the pocket magnetic stand, and the maker’s Travel Tripod is a full-size camera tripod with a phone mount in its box, a different product entirely.

What the stock evidence does not settle. Three of these listings should be read with the live-offer check first. The ST-02S’s, the JOBY kit’s and the SmallRig cage’s listing evidence rests on full crawls of the listings some months old rather than current tracker histories, although all three models are carried as current picks in roundup coverage updated within days of this guide; on each, confirm that the live offer is present and the seller is the maker or a traceable dealer before anything else. The ST-06S follows the same pattern through regional listing data. The Peak Design listing carries the freshest evidence of the five, with current price tracking and a fulfilled-by-Amazon mirror reading within recent weeks, and it is also the listing where the seller matters most, since the maker’s lifetime guarantee runs with the genuine product. None of the five listings reviewed carried a no-featured-offer flag in its summary data. Two fit checks deserve a line each so they are not mistaken for product faults: the clamp ranges in this guide are measured on the cased phone, and a phone at the very edge of a range belongs on the next mount up the ladder; and the magnetic pick’s requirement — a MagSafe phone, a MagSafe case, or the maker’s adapter — is a property of the mounting system, not a defect in the stand.

FAQ

Can a phone on a mount like these replace a webcam for streaming?
For a growing share of setups, yes, and the mount is what makes it practical. Current phones carry cameras well past the mainstream webcam tier, and streaming software accepts them as sources directly or through companion apps, so the remaining problem is physical: the phone has to sit at camera height, at the right angle, for the whole stream, with its charging cable routed and its microphone carried. That is the mount’s job description. The clamp and cage picks here put the phone on the tripod or desk mount a webcam would have used, at the height a webcam would have sat, and hold it there; the webcam’s remaining advantages are that it lives on the monitor permanently and asks for no battery management, which is why most phone-camera setups keep the phone as the second angle or the mobile rig rather than the only camera.

Will a clamp mount fit my phone with its case on?
Only if the cased width lands inside the clamp’s published range, and the case is the part buyers forget to measure. The ranges in this guide run from about 2.2 to 3.7 in depending on the pick, and they are measured across the object being gripped — the phone in its case, including the case’s rails and any grip texture standing proud of the edges. A large phone in a slim case fits nearly everything here; the same phone in a thick protective case can pass the top of the narrower ranges, the cage’s included. The discipline is to measure the cased phone, aim for the middle of a mount’s range rather than its edge, and remember that a clamp at the very end of its travel grips with the least of its jaw — the ST-02S’s wider span exists for exactly this buyer.

Clamp or MagSafe: which holds a streaming phone better?
They hold differently, and the better one depends on what hangs off the phone. A clamp’s grip is mechanical and set by the streamer — the ST-02S’s screw knob most of all — and it carries accessories through its cold shoe because the phone’s back stays clear. A magnetic mount’s grip is the magnet array in the phone itself, instant on and off, with a hold the maker rates for the phone alone; it carries no accessories, and its stand folds against the phone so it is present everywhere the phone goes. For a fixed desk angle with a microphone riding along, the clamp is the better hold. For a phone that moves between hand, desk and tripod all day and carries nothing, the magnet is the better system. The failure to avoid is mixing the briefs: accessories hung off a magnetic mount, or a clamp expected to live in a pocket.

Do I need the cage, or is a clamp enough?
Count the accessories, and the answer follows. A clamp is enough when the phone works alone or with one accessory: the ST-02S carries a microphone or a light on its single cold shoe and puts the phone on any stand, which covers the desk second angle and most single-phone setups. The cage earns its size at two accessories and beyond, or the moment the stream goes handheld — it gives the microphone, the light and a power bank holder each a mounting point on one frame, and its handles turn the phone into a two-handed rig for walking segments. Between those poles sits the ST-06S, the budget adapter whose two cold shoes cover the microphone-and-light pairing without the cage’s frame. Buy for the rig being built this season; the cage’s surplus mounting points only pay when something is mounted on them.

Conclusion

The right phone mount for a stream is the one whose grip matches the phone, whose range matches the cased phone’s width, and whose mounting points match the accessories the rig actually carries. Choose the ULANZI ST-02S for the purest clamp, machined aluminum with a screw-set grip and one cold shoe, for the phone that works as a camera position on a stand already owned. Choose the SmallRig Universal Phone Cage when the phone is the whole rig and the microphone, light and handles all need one frame. Choose the JOBY GripTight GorillaPod PRO 2 when the position changes from stream to stream and the legs have to wrap, grip and level on whatever furniture is there. Choose the Peak Design Mobile Tripod when the phone is a MagSafe iPhone and the mount should live on the phone itself, at desk height, everywhere it goes. Choose the ULANZI ST-06S when the budget decides and two cold shoes on one small adapter make the parts into a rig. Confirm the live offer and the seller on the clamp, cage and JOBY listings, match model numbers rather than headlines across all four makers’ families, measure the cased phone before ordering, and the phone stops being the least stable camera in the setup.

S
StreamingJet Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Phone Mounts for Streaming: Clamps, Cages and…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.