Updated Nov 12, 2026· 7 min read

Key takeaways

  • 10GBASE-T (RJ45 copper): Uses familiar Ethernet sockets. Cat6a cable is generally rated for 10Gb at up to 100 meters, and Cat6 for shorter runs, often quoted around 55 meters. Cat5e is generally limited to lower speeds such as 2.5 or 5Gb. Copper ports typically run warmer and draw more power than SFP+.
  • SFP+ (cage for modules): Uses direct attach copper (DAC) cables for short runs or optical modules with fiber for longer ones. Reviewers often note lower heat and latency and a lower cost per port, but you must buy the right modules or cables.

For a home or small-office 10Gb network, buy an unmanaged multi-port 10GBASE-T switch such as the TP-Link TL-SX1008 or Netgear XS508M if you want to reuse copper Ethernet cabling, choose a MikroTik or Ubiquiti SFP+ switch if you want the lowest cost per port and are comfortable with fiber or DAC cables, and pick a mixed switch such as the Zyxel XGS1250-12 if you only need one or two 10Gb links alongside ordinary gigabit devices.

Start with the port type, not the brand

The most common mistake with 10Gb switches is buying the wrong port type. There are two families, and they do not plug into each other without extra parts.

  • 10GBASE-T (RJ45 copper): Uses familiar Ethernet sockets. Cat6a cable is generally rated for 10Gb at up to 100 meters, and Cat6 for shorter runs, often quoted around 55 meters. Cat5e is generally limited to lower speeds such as 2.5 or 5Gb. Copper ports typically run warmer and draw more power than SFP+.
  • SFP+ (cage for modules): Uses direct attach copper (DAC) cables for short runs or optical modules with fiber for longer ones. Reviewers often note lower heat and latency and a lower cost per port, but you must buy the right modules or cables.

If your computers have 10GBASE-T network cards, you need RJ45 ports or SFP+ to RJ45 modules. Reviewers warn that RJ45 modules in an SFP+ cage run hot and are best avoided in bulk. If your NAS or server uses SFP+, a SFP+ switch connects with a cheap DAC cable.

Comparison at a glance

Model Best for Key stated ports (per maker) Limits
TP-Link TL-SX105 Small copper 10Gb setups 5 x 10G RJ45, unmanaged Few ports; no management features
TP-Link TL-SX1008 Eight-port copper 10Gb 8 x 10G RJ45, unmanaged No management; warm under load
Netgear XS505M / XS508M Home labs and studios 5 or 8 x 10G RJ45, unmanaged Premium tier for an unmanaged switch
MikroTik CRS305-1G-4S+IN Cheapest SFP+ entry 4 x SFP+ and 1 x gigabit RJ45 Setup via RouterOS; small port count
MikroTik CRS309-1G-8S+IN Larger SFP+ aggregation 8 x SFP+ and 1 x gigabit RJ45 Learning curve for non-technical users
MikroTik CRS304-4XG-IN Small managed copper 10Gb 4 x 10G RJ45 and 1 x gigabit RJ45 RouterOS configuration
Ubiquiti USW-Aggregation UniFi networks with SFP+ devices 8 x SFP+ Best inside a UniFi ecosystem
Zyxel XGS1250-12 Mostly gigabit with a few fast links 8 x gigabit, 3 x multi-gig RJ45 up to 10G, 1 x SFP+ Only a few 10Gb ports

Port counts and feature sets vary by hardware revision, so compare this table with the maker’s product page before ordering.

Best for simple copper setups: TP-Link TL-SX105 and TL-SX1008

These unmanaged switches provide only the essentials: plug in devices and they negotiate speed. The maker lists five or eight 10G RJ45 ports respectively. They fit buyers who have a desktop, a NAS and perhaps a second workstation, all with 10GBASE-T adapters, and who do not need VLANs or monitoring. Reviewers value the simplicity and compact metal enclosures but note the heat that comes with multiple copper 10Gb ports, so allow airflow around the unit. If a fan is present, check the noise before placing it in a quiet room.

Best for studios and home labs: Netgear XS505M and XS508M

Netgear’s unmanaged multi-gig lineup targets creative studios and prosumers who move large files between editing machines and storage. Reviewers appreciate the build quality and reliable behavior. The main drawback is the tier, since you pay for a recognized brand and longer support guarantees compared with the lowest-cost options. Choose the five-port model if you will not exceed five devices; otherwise the eight-port gives room to grow.

Best value per port: MikroTik CRS305, CRS309 and CRS304

MikroTik is widely cited by reviewers and home-lab communities for inexpensive 10Gb. The CRS305 provides four SFP+ cages, the CRS309 provides eight, and the CRS304 provides four 10G RJ45 ports, each alongside a gigabit management port. They run RouterOS or SwOS, which gives deep control but is not friendly to beginners. Cooling is passive in several models, which suits quiet rooms, though fanless units can still get warm. If you are comfortable with configuration and DAC cables, these are the typical budget-tier choice.

Best for UniFi networks: Ubiquiti USW-Aggregation

The maker lists eight SFP+ ports. It is meant as an aggregation switch in a UniFi setup, connecting a router or gateway, access switches and storage. If you already use UniFi gear and its controller, it fits neatly. If you do not, a MikroTik switch offers similar port types with less lock-in to one ecosystem.

Best for upgrading gradually: Zyxel XGS1250-12

You may not need eight 10Gb ports. The maker lists a mix of gigabit ports, multi-gigabit RJ45 ports that can reach 10Gb and an SFP+ cage. That suits a home with a single fast workstation and NAS and a bunch of ordinary devices. It also keeps costs down and gives some management features, so check the maker’s list of supported tasks.

Other things to check

Management features

Unmanaged switches are plug and play. Managed or smart switches add VLANs, link aggregation, port mirroring and monitoring. Choose managed only if you need those tools.

Cabling

For copper, Cat6a is the safest choice for 10Gb, especially for longer runs. For SFP+, DAC cables suit short links inside a rack, while fiber suits longer ones.

Heat and noise

Copper 10Gb is warmer than SFP+. Switches with fans can be loud in an office. Fanless designs are quieter but need ventilation.

Your other equipment

A fast switch helps only if your NAS, PC network card and storage can keep up. A single hard drive rarely fills a 10Gb link, whereas an SSD array or NVMe-based NAS can.

Power and warranty

Check whether the switch uses an internal power supply or an external adapter, and compare warranty terms stated by the maker.

Pick X if…

Pick this If you
TL-SX105 or TL-SX1008 want plug-and-play copper 10Gb at a lower tier
Netgear XS505M or XS508M want a well-known brand for a studio or office
MikroTik CRS305 / CRS309 want the lowest cost per 10Gb port and can configure RouterOS
MikroTik CRS304 want a small managed switch with RJ45 10Gb ports
Ubiquiti USW-Aggregation already run UniFi and use SFP+ devices
Zyxel XGS1250-12 need a few 10Gb links and many gigabit ports

Alternatives to consider

  • 2.5Gb or 5Gb multi-gig switches: Cheaper and cooler, and good enough if your internet and storage cannot exceed those speeds.
  • Direct connection between two machines: If you only need a fast link between a PC and a NAS, a direct cable can avoid buying a switch.
  • QNAP QSW series: Other makers sell unmanaged and managed 10Gb switches, such as QNAP’s lineup, which suits users who already own QNAP storage.

Planning the upgrade

Before buying, list every device that will connect at 10Gb: the main computer, the NAS, any server and the uplink to your router. Count the ports, add one or two spare, and note whether each device uses RJ45 or SFP+. Most home routers have gigabit or 2.5Gb ports, so the switch usually connects to the router through a single slower link while fast devices talk to each other at full speed. Also check that your NAS storage can sustain high throughput, since a single drive often cannot fill a 10Gb link. Finally, read the maker’s guidance on mounting, ventilation and power so the switch is placed where heat can escape.

Frequently Asked Questions

Do I need Cat6a cable for 10Gb Ethernet?

Cat6a is the standard that supports 10GBASE-T at up to 100 meters. Cat6 often works for shorter runs, commonly quoted around 55 meters, while Cat5e is generally limited to lower speeds. If you are running new cable, Cat6a is the safer choice.

Should I choose SFP+ or RJ45 10Gb ports?

SFP+ typically costs less per port and runs cooler, but needs DAC cables or fiber modules. RJ45 uses standard cable and connects to 10GBASE-T network cards directly. Match the switch to the ports on your NAS and computers.

Is an unmanaged 10Gb switch enough for a home?

For most homes and small studios, yes. You plug devices in and they negotiate speed. A managed switch is useful if you need VLANs, link aggregation or traffic monitoring.

Will a 10Gb switch speed up my internet?

Only if your internet service is faster than the rest of your network allows, which is uncommon. A 10Gb switch mainly speeds up traffic between local devices, such as a computer and a NAS.

Why does my 10Gb switch run hot?

Copper 10GBASE-T ports generate more heat than SFP+. Allow space around the switch, avoid stacking items on top, and follow the maker’s guidance on operating temperature.

Can I mix 10Gb devices with slower ones?

Many 10GBASE-T switches negotiate down to lower speeds such as 5Gb, 2.5Gb or 1Gb, but the supported speeds vary by model. Check the maker’s spec sheet if you plan to connect older gigabit devices.

S
StreamingJet Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.