Updated Nov 21, 2026· 10 min read

Key takeaways

  • Shock mounts stop desk bumps and keyboard thumps from reaching your microphone. Five verified picks matched to mic diameter, weight and thread size.

This site already covers the hardware that holds a microphone in the air: boom arms, desk stands, pop filters and windscreens each have their own guide. The missing layer is the one that sits between the microphone and everything it is attached to. A shock mount is a suspension cradle that floats the mic on elastic or flexible supports, so the thump of a keyboard, a knee against the desk leg or a hand brushing the arm does not travel straight into the capsule as low-end rumble. The five picks below are the mounts that fit the microphones streamers and podcasters actually use, from large studio condensers to handheld dynamics.

Our top pick: Rycote InVision USM Universal Studio Mount. Runner-up: Rode SM6 Shock Mount with Detachable Pop Filter.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.

Two honest points frame the whole guide. First, a shock mount does one job only: it breaks the mechanical path between your desk and your microphone. It will not improve the tone of the mic, tame a reflective room or rescue a noisy preamp, and any listing that promises a warmer or richer voice from a suspension cradle is selling fiction. Second, fit is everything. A mount is chosen against the microphone’s body diameter and weight, not against your desk or your arm, and every diameter, weight and capacity figure quoted below is a maker figure, useful for matching parts on paper rather than a promise about how your room will sound.

How to Choose a Microphone Shock Mount

Start with body diameter. Suspension mounts grip the microphone around its body or by a threaded ring at its base, and both systems are sized. Ring-and-elastic cradles state a diameter range; a mic narrower than the range rattles loosely in the cradle, and one wider than the range either will not enter or stretches the suspension until it sags. Threaded-ring mounts are stricter still: they screw onto threads at the base of the microphone, so a mic without those threads cannot use them at all. Measure the body of your mic at its widest point and compare it with the maker’s stated range before anything else.

Match weight to suspension tension. Elastic suspensions are tuned for a weight band. A heavy microphone stretches the elastics until the cradle bottoms out against its own frame, which quietly restores the solid path the mount exists to break. A very light microphone on a stiff suspension barely deflects it, and an undeflected suspension isolates poorly. The same physics governs the mount’s own weight: a heavy mount plus a heavy mic is the combined load your boom arm’s springs must hold, so add the two figures together when you check an arm’s capacity.

Elastic versus Lyre suspension. Most mounts float the mic on woven elastic cord. Elastic works well, is cheap to make, and perishes: over a few years it loses tension, frays at the hooks and eventually snaps, so check whether the maker sells replacement cord sets. Rycote’s Lyre design replaces elastic with flexible thermoplastic arms that do not stretch, sag or rot, which removes the maintenance question entirely, at the expense of a narrower happy weight band. Neither system isolates better by definition; a fresh elastic suspension and a Lyre suspension both beat a rigid clip, and a worn-out elastic suspension beats nothing at all.

Check the thread and the tilt lock. Nearly every mount here attaches through the standard 5/8-inch microphone thread, and several include adapters for the 3/8-inch thread found on many arms and stands. Confirm what your arm or stand presents and whether the adapter you need is in the box. Then look at the angle adjustment: a mount that cannot lock its tilt firmly will let a heavy condenser creep downward mid-stream, so a toothed or well-clamped pivot matters more than smooth one-finger adjustment.

Know which problem you are solving. Condenser microphones are far more sensitive to structure-borne vibration than handheld dynamics, which is why most shock mounts are built around condensers. A dynamic mic on a desk stand still transmits a solid thump when the desk is struck, though, and a clamp-style mount sized for handheld dynamics exists for exactly that case. What no shock mount touches is airborne sound: echo, room reverb and fan noise pass around it freely, and those belong to the isolation shield and room treatment guides elsewhere on this site.

The 5 Best Microphone Shock Mounts

Rycote InVision USM Universal Studio Mount

The engineering-first pick, and the only mount here with nothing to wear out. Instead of elastic cord, the InVision USM suspends the microphone between Rycote’s patented Lyre arms, flexible thermoplastic supports that flex to absorb vibration but never stretch, sag or perish, so the isolation it gives on day one is the isolation it gives in year ten. Swiveling clamp pads grip the mic body directly, which is how one mount covers a wide diameter range without threaded rings or interchangeable inserts. For a streamer running a large condenser on a boom arm, this is the mount to buy once and stop thinking about.

Specs:
– Suspension: Rycote Lyre thermoplastic arms, no elastic parts
– Microphone diameter: 18 to 55 mm (maker figure)
– Maximum mic weight: 750 g vertical use, 500 g horizontal use (maker figures)
– Grip: swiveling clamp pads with rubber contact surfaces
– Stand thread: 5/8 inch
– Model: InVision USM, part 044901

See it on Amazon

Rode SM6 Shock Mount with Detachable Pop Filter

The matched mount for Rode’s large-diaphragm studio condensers, and the most complete single purchase here. The SM6 floats the microphone in an elastic suspension inside a metal frame, sized and tuned for Rode bodies, and it adds a detachable pop filter on a telescopic arm with two axes of adjustment, so the screen sits exactly off the capsule without a second gooseneck clamped to your arm. The trade is weight and exclusivity: at a maker-stated 682 g the mount alone is a serious load for a light boom arm, and the cradle is shaped for Rode microphones, so owners of other brands should look elsewhere in this list.

Specs:
– Suspension: elastic band suspension in a metal frame
– Fits: Rode NT1-A, NT2-A, NT1000, NT2000, NTK and K2 (maker list)
– Pop filter: detachable, telescopic arm, two-axis adjustment
– Stand thread: 5/8 inch, 3/8 inch adapter included
– Weight: 682 g (maker figure)
– Dimensions: 210 x 133 x 210 mm (maker figures)

See it on Amazon

Elgato Wave Shock Mount

The purpose-built mount for the microphones this site’s readers most often stream with. Elgato builds the Wave Shock Mount around a solid steel chassis rather than a plastic ring, with a reinforced elastic suspension tuned to the cylindrical bodies of the Wave:1, Wave:3 and Wave DX. Threading is the most flexible here: the mount presents a native 5/8-inch thread and ships with 3/8-inch and 1/4-inch adapters, so it drops onto boom arms, desk stands and camera-style mounts without a hardware hunt. The honest limit is in the name: the cradle geometry is drawn around Wave bodies, and a much wider or narrower microphone will sit off-centre in it.

Specs:
– Chassis: steel
– Suspension: reinforced elastic
– Fits: Elgato Wave:1, Wave:3 and Wave DX (maker list)
– Stand thread: 5/8 inch native, 3/8 inch and 1/4 inch adapters included
– Weight: 190 g (listing figure)
– Dimensions: 13.5 x 11.5 x 3.2 cm (listing figures)
– Model: 10MAE9901

See it on Amazon

Samson SP01 Spider Shock Mount

The long-running budget classic, built on a different attachment idea. Rather than gripping the microphone’s body, the SP01’s locking ring screws onto the threaded base found on many studio condensers, and the spider-style elastic suspension then floats that ring inside the outer frame. Done up properly it is a secure, tidy mount that adds little bulk around the mic. The caveats are real: a microphone with no base threads cannot use it, thread depth varies between models so some mics seat less deeply than others, and the elastic cord is a consumable that will want replacing after years of service. For a compatible condenser, though, the design has survived in production for a reason.

Specs:
– Suspension: elastic spider suspension
– Attachment: threaded locking ring screws onto the microphone base
– Fits: condenser microphones with matching base threads (maker positions it for Samson condensers)
– Stand thread: standard stand thread with removable reducer nut
– Frame: metal spider frame
– Model: SP01

See it on Amazon

Boseen Shock Mount for Handheld Dynamic Microphones

The pick for the other half of streaming desks: handheld dynamics such as the Samson Q2U and Shure SM58, which most condenser cradles cannot hold at all. This clamp-style holder grips the tapered body of a dynamic microphone between 28 and 32 mm in diameter, floats the clip on an elastic suspension, and breaks the direct path that turns every desk knock into a thump through a rigid mic clip. Dynamics are less vibration-sensitive than condensers, so the gain is smaller, but on a desk stand in a busy room it is still the difference between a bump you hear and a bump you do not. Check your mic’s diameter at the grip point before ordering, because tapered bodies vary.

Specs:
– Suspension: elastic suspension around a clamp-style holder
– Fits: dynamic microphones 28 to 32 mm in diameter (listing figure)
– Listing names: Samson Q2U, Shure SM58, Audio-Technica ATR2100-USB and AT2005-USB, Behringer XM8500, Shure PGA48 and PGA58
– Stand thread: standard microphone stand thread
– UPC: 793610060396

See it on Amazon

Comparison Table

Mount Suspension Fits Thread Extra
Rycote InVision USM Lyre thermoplastic arms Bodies 18 to 55 mm 5/8 inch No elastic to replace
Rode SM6 Elastic, metal frame Rode large-diaphragm condensers 5/8 inch, 3/8 adapter Detachable pop filter on telescopic arm
Elgato Wave Shock Mount Reinforced elastic, steel chassis Elgato Wave:1, Wave:3, Wave DX 5/8 inch, 3/8 and 1/4 adapters Widest adapter set in the box
Samson SP01 Elastic spider Condensers with threaded bases Stand thread, reducer nut Screws onto the mic itself
Boseen Dynamic Shock Mount Elastic, clamp holder Handheld dynamics 28 to 32 mm Stand thread Made for Q2U and SM58 class mics

Frequently Asked Questions

Does a shock mount help if my microphone sits on a desk stand?

Yes, and arguably that is where it helps most. A desk stand is a rigid bridge between the desktop and the microphone, so every keyboard thump and mug set down hard arrives at the capsule almost undiminished. A suspension mount breaks that bridge. On a boom arm the arm itself already absorbs some energy, but the mount still removes the knocks that travel up the arm when you adjust it or brush it mid-stream.

Will any shock mount fit my microphone?

No. Fit is decided by three things: the diameter of the microphone body against the cradle’s stated range, the weight of the mic against the suspension’s tuning, and the attachment style, since threaded-ring mounts only work on microphones with matching base threads. Measure your microphone, weigh it if the maker does not publish a figure, and match both numbers to the mount’s stated range before ordering.

Should I buy a shock mount or an isolation shield first?

They solve different problems. A shock mount stops vibration that travels through the stand, arm and desk. An isolation shield works on airborne sound, softening the room reflections that reach the microphone from in front of you. If your recordings are clean except for thumps when the desk is touched, buy the mount. If the thumps are fine but your voice sounds echoey, the shield and room treatment are the fix, and this site covers shields in their own guide.

How long do elastic suspensions last, and can they be repaired?

Elastic cord typically gives a few years of service before it loses tension, starts to sag under the microphone or frays at its hooks, and a sagging suspension quietly stops isolating long before it visibly fails. Some makers sell replacement cord sets, and generic elastic can be restrung through most cradles with patience. Lyre-style suspensions sidestep the question entirely, since the thermoplastic arms do not stretch or perish.

Conclusion

A shock mount is a small, mechanical answer to a specific problem: the desk your microphone shares with your keyboard is loud, and a rigid mount delivers all of it to the capsule. Match the cradle to your microphone’s diameter and weight, keep the combined load within your arm’s capacity, and the problem largely disappears. The Rycote InVision USM is the buy-once choice for large condensers, the Rode SM6 is the complete matched kit for Rode owners, the Elgato mount serves Wave users with the best adapter set here, the Samson SP01 remains the threaded-ring classic, and the Boseen holder finally gives handheld dynamics the same isolation condensers have always had.

S
StreamingJet Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Microphone Shock Mounts for Streaming and PodcastingCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.