Updated Nov 21, 2026· 10 min read

Key takeaways

  • Vent-hook, adhesive, steel and top-shelf mounts that hide a Roku, Fire TV or Apple TV behind the TV, plus the fit and Wi-Fi checks to make first.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.

Our top pick: TotalMount for Roku Ultra. Runner-up: HIDEit ATV4 Apple TV Mount.

A streaming player is small, light, and oddly hard to put anywhere. Boxes dangle from short HDMI cables, slide off the soundbar, or sit on the console in a nest of cords. Sticks plug straight into the TV and vanish, until you need the port they are blocking. A dedicated mount solves the placement problem: it fixes the player behind the screen, on the wall behind the TV, or on a small shelf above it, so cables stay short and the console stays clear.

This guide covers mounts and holders only; the site already has roundups of TV wall mounts, TV stands, and the players themselves. The five picks use five attachment ideas: vent hooks with an adhesive backup, a model-specific steel wall mount, an adjustable universal bracket, a VESA plate with straps, and a clip-on top shelf. One limit runs through all of them: a mount decides where the player sits, not how well it hears your remote or your router, and the sections below say where each style can go wrong.

How to Choose a Mount for a Streaming Player

Match the cradle to your exact player

Streaming players change shape between generations, and model-specific mounts are molded to one chassis. Roku alone has used several box widths across the Express, Express 4K, and Ultra lines, and Apple has shipped three different Apple TV 4K enclosures. A cradle built for one generation can grip the next one loosely or not at all. Before ordering a fitted mount, confirm the listing names your model number, not just the family. If you swap players often, an adjustable bracket or strap plate trades the snug molded fit for a width range that survives upgrades.

Sticks are the exception. A stick plugs directly into an HDMI port, so stick owners usually need cable room more than a cradle: if the ports are recessed or crowded, a short HDMI extension lead moves the stick out of the pocket and lets it hang flat. The mounts below are aimed at box-style players, though the top shelf also gives a stick’s power brick a tidy parking spot.

Pick an attachment your TV can actually accept

Adhesive is the easiest install and the least forgiving. TV back panels run warm, heat cycles soften many pads, and a bond that lets go drops the player behind the console. Heat-resistant pads made for television backs hold better, but removal can still lift paint from furniture or leave residue on textured plastic, so treat adhesive as semi-permanent. Vent hooks avoid glue entirely by clipping into the cooling slots on the back of the set, yet they only work if your TV has slots of a matching size and spacing, and the player must not blanket the vents it hangs from. Screwed steel mounts and VESA plates are the strongest options and outlast several players, at the expense of tools and, for wall mounting, holes.

Place it for the remote and the router, not just the photo

Two signals have to reach a hidden player. The first is the remote: remotes that use infrared need a clear path to the player’s front window, so an IR-controlled player has to sit near the top, side, or bottom edge of the screen where the beam can bounce in. Remotes that pair over Bluetooth or Wi-Fi Direct do not care, and those players can hide in the center of the back panel. The second signal is Wi-Fi. A mount cannot fix a weak connection, and the metal back of some televisions, plus a steel wall bracket, can soak up signal. Keep the player toward an edge rather than dead center behind a metal panel, and run a signal check from the player’s own settings menu before you commit to adhesive or screws; if the numbers are poor, move the player or the router, not the bracket style.

The 5 Best Mounts and Holders for Streaming Players

1. TotalMount for Roku Ultra

TotalMount’s Ultra cradle is the flexible one in this list because the box holds three attachment methods. A heat-resistant adhesive pad bonds it to a smooth TV back, built-in hooks clip into the television’s rear cooling slots with no glue at all, and screws are included for wall fixing. The open frame leaves channels around the player for airflow, which matters against a warm panel. Fit is broad within one family: the maker lists every Roku Ultra and Ultra LT generation, including the 4660, 4670, 4800, 4802, and 4850 models.

The limits are the flip side of that focus: the cradle is shaped for the roughly five-inch-square Ultra chassis, so it is not a universal holder, and the vent hooks depend on your TV having compatible slots. Ultra remotes pair without line of sight, so the player can sit fully hidden mid-panel.

Specs:

  • Brand: TotalMount
  • Model: 0591
  • Fits: Roku Ultra and Roku Ultra LT, all generations (maker-stated)
  • Attachment: heat-resistant adhesive pad, TV vent hooks, wall screws
  • Design: open-frame cradle with ventilation channels
  • Player and cables not included

See it on Amazon

2. HIDEit ATV4 Apple TV Mount

HIDEit takes the opposite approach: a mount machined for exactly one device. The ATV4 is a 16-gauge cold-rolled steel cradle shaped for the fourth-generation Apple TV HD, and it fixes to the wall with the included flat-head drywall screws and anchors, behind the TV or anywhere the cables reach. Cords can face up or down, which helps when the nearest outlet is below the mount. Steel does not creep, soften, or let go in a warm room, so this is the set-and-forget option in the group.

Read the fit line carefully: this mount suits the Apple TV HD (4th generation) only. The Apple TV 4K generations use different enclosures and different HIDEit models, and no other brand’s player belongs in it. If yours is a 4K model, skip to the adjustable picks below.

Specs:

  • Brand: HIDEit Mounts
  • Model: HIDEit ATV4
  • Fits: Apple TV HD (4th generation) only
  • Material: 16-gauge cold-rolled steel
  • Dimensions: 4 x 1.5 x 3.25 in; weight 5 oz
  • Hardware: drywall screws and anchors included; cords can face up or down

See it on Amazon

3. Mount-It! Cable Box Mount Behind TV (MI-356)

Mount-It! builds the universal bracket of the group. The MI-356 is a steel cradle whose width adjusts from 1.75 to 2.75 inches, with a 5 by 5 inch platform, so it grips a streaming box today and a different one after your next upgrade. The maker puts capacity at 11 pounds, far beyond any streaming player, which also makes it a home for a small cable box or mini PC. It can screw to a wall, sit behind the TV, or bolt to a TV wall-mount bracket, and the hardware is in the box.

Universal means you do the measuring: your player has to fall inside that width range, and a slim stick-style device will rattle in a cradle built for boxes. The steel adds depth behind the screen, so check the gap to the wall before counting on the behind-TV position.

Specs:

  • Brand: Mount-It!
  • Model: MI-356
  • Fit range: cradle width adjusts 1.75 to 2.75 in; platform 5 x 5 in
  • Capacity: 11 lb (maker-stated)
  • Material: steel
  • Mounting: wall, behind TV, or TV wall-mount bracket; hardware included

See it on Amazon

4. ECHOGEAR Universal Streaming Device Mount (Echo-SDMU)

ECHOGEAR’s mount is a flat alloy steel plate that bolts to a single VESA hole on the back of the TV, or slides between the TV and an existing wall mount at one VESA point. Two hook-and-loop straps lash the player to the plate, so almost any small box fits without a molded cradle. The maker sets the limit at 3 pounds, and the manual’s compatibility list covers Roku players, Apple TV generations one through four plus 4K models, Fire TV, TiVo Mini, and Slingbox.

Because the plate hangs from one VESA point, the manual suggests evening out the gap with spare washers if the TV sits slightly skewed. Straps also need a periodic tug check, since hook-and-loop can relax over time in a warm spot.

Specs:

  • Brand: ECHOGEAR
  • Model: Echo-SDMU
  • Capacity: up to 3 lb (maker-stated)
  • Material: alloy steel plate
  • Attachment: single TV VESA hole or existing wall mount; M4, M6, M8 screws, washers, spacers included
  • Retention: two hook-and-loop straps

See it on Amazon

5. Mount Plus Top Shelf TV Clip Mount (MP-APM-03-01)

The Mount Plus takes the player out from behind the TV entirely. It is a 5-inch-wide shelf that clips over the top edge of the screen, held by an adjustable ratcheting clamp, so nothing sticks to the back panel and nothing screws into the wall. The listing names Roku Express+, Premiere+, and Ultra, Apple TV, and Fire TV boxes, and the ledge is equally happy holding a small speaker or the remote. Because the player sits in open air, heat and remote signals are both non-issues.

The trade-offs are visibility and grip: the player is on display, and the clamp needs a top edge with enough thickness and a fairly flat profile, so very thin-bezel sets and curved backs can be poor hosts. On a stand-mounted TV in a bedroom or kitchen, though, it is the fastest install here.

Specs:

  • Brand: Mount Plus
  • Model: MP-APM-03-01
  • Shelf width: 5 in
  • Attachment: adjustable clip with ratchet mechanism over the top edge of the TV
  • Fits (listing): Roku Express+, Premiere+, Ultra; Apple TV; Fire TV boxes; small speakers
  • Tools: none

See it on Amazon

Comparison Table

Mount Attachment Fits Capacity
TotalMount for Roku Ultra Adhesive pad, vent hooks, or screws Roku Ultra and Ultra LT, all generations Sized for the Ultra chassis
HIDEit ATV4 Drywall screws and anchors Apple TV HD (4th generation) only Steel cradle, anchors included
Mount-It! MI-356 Screws to wall, TV, or wall-mount bracket Boxes 1.75 to 2.75 in wide 11 lb (maker-stated)
ECHOGEAR Echo-SDMU Single VESA bolt plus straps Most small players up to 3 lb 3 lb (maker-stated)
Mount Plus MP-APM-03-01 Ratcheting clip over the top edge Boxes and small speakers on a 5 in shelf Shelf mount, no adhesive

Frequently Asked Questions

Can I hide a streaming player completely behind my TV?

Yes, if its remote pairs over Bluetooth or Wi-Fi Direct, as most current Roku, Fire TV, and Apple TV remotes do. Those signals pass around the panel, so the player can sit mid-back. If your remote uses infrared, the player must peek out at an edge so the beam can reach its front window; fully hidden, an IR player ignores the remote.

Will an adhesive mount damage my TV or fall off?

It can do either, which is why this guide treats adhesive as a last resort. Heat from the back panel softens pads over time, and prying a spent pad off can mark textured plastic or painted furniture. Clean the spot first, use a pad made for television backs, press firmly, and wait before loading it. Vent hooks, screws, and VESA plates avoid the question entirely.

Does hiding a player behind the TV weaken Wi-Fi?

It can. The panel, and especially a metal back or a steel wall bracket, sits between the player and the router and can absorb signal. Mount toward an edge of the screen instead of dead center, then check the connection figures in the player’s network settings before the install is final; a few inches of repositioning usually matters more than the choice of mount.

Do these mounts work for streaming sticks too?

Mostly they are built for boxes. A stick plugs straight into the HDMI port and needs no cradle; when the port area is cramped or the stick hangs at an angle, a short HDMI extension lead is the usual fix. The Mount Plus top shelf still helps a stick setup by holding its power adapter and giving cables a tidy route, and the adjustable Mount-It! cradle can hold a stick’s small power brick rather than the stick itself.

Conclusion

Start with the player, not the mount. Roku Ultra owners get the most flexible install from the TotalMount cradle, with vent hooks for a glue-free fit and adhesive or screws as backups. An Apple TV HD (4th generation) belongs in the HIDEit steel mount if it will stay put for years. Anyone who changes players often should look at the adjustable Mount-It! bracket or the strap-based ECHOGEAR plate, and anyone renting is best served by the Mount Plus top shelf. Whichever you choose, measure the player, check how its remote talks, and test the Wi-Fi from the exact spot before the mount becomes permanent.

S
StreamingJet Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Mounts and Holders for Streaming Sticks and…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.